|
Partnumber Search:
|
|
DEMA-Part-ID Search:
|
|
| Detailed Description: |
|
The CM1218 family of devices features transient
voltage suppressor arrays that provide a very high level of protection for
sensitive electronic components which may be subjected to electrostatic
discharge (ESD).
All pins of the CM1218 are rated to withstand ±15kV
ESD pulses using the IEC 61000-4-2 contact discharge method. Using the
MIL-STD-883D (Method 3015) specification for Human Body Model (HBM) ESD, all
pins are protected from contact discharges of greater than ±30kV.
The CM1218 is supplied in a number of compact,
surface mount packages depending on the channel configuration
desired.
Note: Some of the devices listed here
have suggested replacements available. Please see additional information at the
end of this page.
|
|
FEATURES |
APPLICATIONS |
- Low I/O capacitance at 7pF typical
- Two, three, four or five channels of ESD
protection
- In-system ESD protection to ±15kV contact
discharge, per the IEC 61000-4-2 international standard
- Compact SMT package saves board space and
facilitates layout in space-critical applications
- Each I/O pin can withstand over 1000 ESD
strikes
- Lead-free packaging
|
- High-speed consumer electronic ports
- ESD protection of PC ports, including USB ports,
serial ports, parallel ports, IEEE1394 ports, docking ports, proprietary
ports, etc.
- Protection of interface ports or IC pins which
are exposed to high ESD levels
|
|
DATA SHEET(S)
|
| |
Part Number |
|
Datasheet |
| |
CM1218-02S7,
CM1218-02SO, CM1218-03SR, CM1218-04S7, CM1218-04SE, CM1218-04SO,
CM1218-05S7, CM1218-05SE, CM1218-05SO |
|
Data Sheet (PDF - 150.47 KB)
Last Revision Date: 2007-09-26
| |
|
PACKAGING, FINISHING & STATUS
INFORMATION
|
| Part Number |
Package |
Lead-Free
Finishing |
Status |
| CM1218-02S7 |
SC70-3 |
 |
Active |
| CM1218-02SO |
SOT23-3 |
|
Active |
| CM1218-03SR |
SOT143 |
|
Active |
| CM1218-04S7 |
SC70-5 |
|
Active |
| CM1218-04SE |
SOT-553 |
|
Active |
| CM1218-04SO |
SOT23-5 |
|
Active |
| CM1218-05S7 |
SC70-6 |
|
Active |
| CM1218-05SE |
SOT-563 |
|
Active |
| CM1218-05SO |
SOT23-6 |
|
Active |
|
|
|
| Document Type and Description |
Date, Size |
| PCN | [PCN Name] | [DATE], [SIZE] |
| Application Note | [ on request (phone +49 89 286941 -0) ] | [DATE], [SIZE] |
| | Category Options: |
ESD Protection, EMI Filtering, Analog Port
Solutions
|
Califonia Micro Devices (CMD) besitzt
inzwischen jahrzehntelange Erfahrung in der Entwicklung und im Design von
ESD Schutz Lösungen auf Halbleiterebene. Gerade im professionellen Bereich
der Industrieelektronik, Steuerungstechnik oder Mess- und Regeltechnik
sind Feldausfälle durch ESD ärgerlich und teuer.
Hier kann CMD
mit einer Fülle an Standardprodukten und Lösungen aufwarten...
- ESD Schutz von mindestens 8kV bis zu 25kV
- für bis zu
16 Kanäle
- sehr geringe
Eigenkapazität
- spezifiziert nach IED61000-4-2
- ultraschnelle
Schaltgeschwindigkeiten
- Miniaturgehäuse (SMD) sind Standard, CSP
(Chip-Scale-Package) möglich
Näheres dazu finden Sie im
folgenden "Product Selection Guide" in welchem wir alle von
CMD verfügbaren ESD Schutzbausteine jeweils nach Applikation und nach
Funktion sortiert für Sie aufgelistet haben.
|
|
| Similar Partnumber
and Description |
Manufacturer |
|
|
| Product Example |
|
| | 4-ch. ESD Protection Array |
|
